2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

What and where are my 5th and 6th ports

Thread Tools
 
Search this Thread
 
Old Jan 24, 2004 | 07:54 PM
  #1  
xmotocrossx04's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 71
Likes: 0
From: Greenville SC
Question What and where are my 5th and 6th ports

Just wondering what and where my 5h and 6th ports are. Because I read everyone talking about them and I can't figuyre out what they are. Thanks sorry for sounding like a dumb ***
Reply
Old Jan 24, 2004 | 07:58 PM
  #2  
superevil's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 224
Likes: 0
From: kentucky
well,they are your 5th and 6th auxilary intake ports.depending on the year of your car they are operated by either your air pump or back pressure from your cats.the open up higher in the rpm range.t2's dont have em. they are below the air intake hose on the passenger side of the engine above the exhaust manifold. they are the two little pod looking things hat kind point in diferent directions. if they didnt work you would know.probably
Reply
Old Jan 24, 2004 | 08:01 PM
  #3  
xmotocrossx04's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 71
Likes: 0
From: Greenville SC
I have an 86na....
Reply
Old Jan 24, 2004 | 08:18 PM
  #4  
Drifter101's Avatar
Back from the dead...
Tenured Member 05 Years
 
Joined: Feb 2003
Posts: 575
Likes: 0
From: Calgary
86 n/a would be located on exhaust side above the exhaust manifold, there are many methods to check to see if they work, some more complicated than others. check out this link, what your referring to is the auxillary ports.. there are countless threads on them so heres a link to a search

https://www.rx7club.com/search.php?s...der=descending

Attached is a picture of them
Reply
Old Jan 24, 2004 | 08:19 PM
  #5  
Drifter101's Avatar
Back from the dead...
Tenured Member 05 Years
 
Joined: Feb 2003
Posts: 575
Likes: 0
From: Calgary
Double Post
Reply
Old Jan 24, 2004 | 08:39 PM
  #6  
superevil's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 224
Likes: 0
From: kentucky
i have an 86 na as well,so the cats activate them.
Reply
Old Jan 24, 2004 | 10:00 PM
  #7  
Kenteth's Avatar
Like Ghandi with a gun
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 4,584
Likes: 0
From: Rapid City, SD
"activate" = stuck like amother unless you personaly have fixed them in the past
Reply
Old Jan 25, 2004 | 02:01 AM
  #8  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
If you're looking in the Haynes manual or Factory Service Manual then you'll need to look for them under their correct name, which is the auxilliary ports, which are part of the 6-Port Induction (6PI) System.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
23Racer
Race Car Tech
1
Sep 21, 2015 10:48 AM
23Racer
Canadian Forum
10
Sep 18, 2015 11:10 AM
teebeekay
3rd Generation Specific (1993-2002)
7
Sep 16, 2015 01:54 PM




All times are GMT -5. The time now is 08:24 PM.