What are some really good 2nd gen Rexy combos?
#1
Junior Member
Thread Starter
Join Date: Jul 2001
Location: Tucson, AZ
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
What are some really good 2nd gen Rexy combos?
What would a really good combo be for an 2nd gen? I'm doing some research for my friend he wants a 2nd gen rexy. So you guys want to tell me your setups? and what kind of times you guys pull. He's kind of looking for bang for the buck with a Turbo on top hehe. But i would like to know some N/A combos to thanks a lot
#3
Rotary Freak
iTrader: (10)
if your friend is mechanically inclined check out http://www.v8rx7.com and look at the forums for some "spirited" 2nd gen RX-7's.
or directly to the forum:
http://www.torquecentral.com/vb225/f...?s=&forumid=11
Mid 10's for $5K? Yes it can and has been done.
LS1+ 2nd gen RX-7 (there are 3 in the works)
GNX7
or directly to the forum:
http://www.torquecentral.com/vb225/f...?s=&forumid=11
Mid 10's for $5K? Yes it can and has been done.
LS1+ 2nd gen RX-7 (there are 3 in the works)
GNX7
#4
Senior Member
Join Date: Jul 2001
Location: Duncan, BC, Canada
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
http://velocity.isfaster.com/new/rides/soul/main.htm
13B twin-rotor, bridgeport, 3 pc 2mm apex seals (shotpeened), low compression rotors, FD3S intake and throttle body, 1000cc primary/secondary injectors, HPI 60pi stainless steel exhaust manifold, HKS TO4R turbine 1.15 a.r, Greddy Type R wastegate, ARC GTR 3 core intercooler, aluminum cross flow radiator, stainless steel 80pi exhaust that y's off into 2 60pi duals with 115pi HPI (N1) mufflers, Greddy Type R blow off valve, disabled power steering and a/c, stainless steel fuel line, stainless steel oil cooler line, dual in-tank GTR fuel pumps, Hurst roll control (line lock).
HKS fully sequential transmission, ORC twin plate clutch, ORC lightened flywheel, Kaaz lsd, stainless steel cluch line.
HKS FCon V, Greddy Profec A boost controller, HKS AIC, Blitz turbo timer, defi 60pi boost and egt gauges, 9mm plug wires, NGK 11 plugs, B&M volt ignition amp, Perma cool 16 in. electric fan.
13B twin-rotor, bridgeport, 3 pc 2mm apex seals (shotpeened), low compression rotors, FD3S intake and throttle body, 1000cc primary/secondary injectors, HPI 60pi stainless steel exhaust manifold, HKS TO4R turbine 1.15 a.r, Greddy Type R wastegate, ARC GTR 3 core intercooler, aluminum cross flow radiator, stainless steel 80pi exhaust that y's off into 2 60pi duals with 115pi HPI (N1) mufflers, Greddy Type R blow off valve, disabled power steering and a/c, stainless steel fuel line, stainless steel oil cooler line, dual in-tank GTR fuel pumps, Hurst roll control (line lock).
HKS fully sequential transmission, ORC twin plate clutch, ORC lightened flywheel, Kaaz lsd, stainless steel cluch line.
HKS FCon V, Greddy Profec A boost controller, HKS AIC, Blitz turbo timer, defi 60pi boost and egt gauges, 9mm plug wires, NGK 11 plugs, B&M volt ignition amp, Perma cool 16 in. electric fan.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
0
08-18-15 10:01 PM