what gauge wire FD alt?
#1
R.I.P. Monte Negro FD
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: NYC & Davie, FL
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
what gauge wire FD alt?
ok, i used this really thin gauge wire. i belive was like 12 and the damn thing fried and messed up my FD alt. I have a S4 which I went thru the diagram posted by silverotor and other members, but my **** fried. my FD alt also has the regulator tricked so it is pushing 170amps. can anyone help out on this wire thing. thanks
#3
Passing life by
OTT 12v+ is far too big as well 1 is not even a gauge number. If you are referring to the wire on the alt post to the batt then, OEM setup is 8GA wire that is crimped into the 4GA wire coming from the battery to the starter and the fuse box.
A 4GA min should be used if you enhance grounding points.
If you are referring to the exciter wires on the ALT then 18GA will be fine.
A 4GA min should be used if you enhance grounding points.
If you are referring to the exciter wires on the ALT then 18GA will be fine.