What exhausts fit the cocksport?
06-14-05, 04:24 AM
#1
Full Member
Thread Starter
Join Date: May 2004
Location: Phoenix AZ
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
What exhausts fit the cocksport?
If im running a cork sport catback, what header will fit this setup? Will this cover my full exhaust or will I need something else? I was thinking of the racing beat header, emissions is not a problem
thanks
-nick
thanks
-nick
06-14-05, 04:22 PM
#4
Depends on what CS you have.
2.5 tapered to 3 or full 3inch CS.
Also there are 3 pieces to the system.
Header/downpipe
Cat/Presilencer
Catback
The header will need a cat or presilencer to meet the Corksport.
They have to match sizes though.
So 3 inch all the way or 2.5 inch.
I'm using RB 2.5 downpipe to 2.5 RB presilencer to Corksport 2.5 tapered to 3inch catback.
2.5 tapered to 3 or full 3inch CS.
Also there are 3 pieces to the system.
Header/downpipe
Cat/Presilencer
Catback
The header will need a cat or presilencer to meet the Corksport.
They have to match sizes though.
So 3 inch all the way or 2.5 inch.
I'm using RB 2.5 downpipe to 2.5 RB presilencer to Corksport 2.5 tapered to 3inch catback.
06-14-05, 04:34 PM
#5
I belive the racing beat header will bolt up to the RB presilencer which bolts to the stock cat-back exhaust system which includes the Y pipe and mufflers. So if your corksport mates with the stock main cat perfectly then you should be ok with those two pieces. But I do not think the RB header will bolt up to the stock main cat.
One of the reasons I run racing beat everythning is because they know what will bolt up to what being that it is all thier stuff. No mixing and matching. Even though thier stuff would work well as a boat anchor being it is so heavy. It sounds good, and will last a long time but is heavy.
I run the RB downpipe, presilencer, cat back all for the N/A on my GTU.
One of the reasons I run racing beat everythning is because they know what will bolt up to what being that it is all thier stuff. No mixing and matching. Even though thier stuff would work well as a boat anchor being it is so heavy. It sounds good, and will last a long time but is heavy.
I run the RB downpipe, presilencer, cat back all for the N/A on my GTU.
Thread
Thread Starter
Forum
Replies
Last Post
