2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

What Exhaust is this? *Vid*

Thread Tools
 
Search this Thread
 
Old Jan 19, 2006 | 09:28 PM
  #1  
rx007racer's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 106
Likes: 0
From: Michigan
What Exhaust is this? *Vid*

Here is a exhaust clip that i found from this club or somewhere on the internet. Don't know anything about it but would like to know what setup this FC is running. "Jager" from this forum suggested that it might be a Greddy Power Extreme exhuast. I would agree with him on that because I've heard them on rx7's before and they sound different then all the other exhaust for our cars, but need some opinions and comments about this setup.
Thanks All!



http://media.putfile.com/Deep-rotory
Reply
Old Jan 19, 2006 | 09:34 PM
  #2  
RevUp13b's Avatar
zZzZzZzZzZz..............
Tenured Member: 20 Years
iTrader: (12)
 
Joined: Nov 2005
Posts: 408
Likes: 1
From: Bay Area, CA
I agree, GReddy Power Extreme...
Reply
Old Jan 19, 2006 | 09:47 PM
  #3  
rx007racer's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 106
Likes: 0
From: Michigan
Can't find any one that sells the PE for our cars though and looking at a few pics they don't compare but sound wise it sounds like it but also noticed that the greddys usually have greddy stamped on the tail pipe insuring that is a true greddy. Keep posting your thoughts.
Reply
Old Jan 19, 2006 | 09:50 PM
  #4  
RevUp13b's Avatar
zZzZzZzZzZz..............
Tenured Member: 20 Years
iTrader: (12)
 
Joined: Nov 2005
Posts: 408
Likes: 1
From: Bay Area, CA
Ebay GReddy knock offs with custom piping???

I think the power extreme was discontinued a while ago...
Reply
Old Jan 19, 2006 | 09:57 PM
  #5  
driftfc87's Avatar
DAYMAN
Tenured Member 15 Years
iTrader: (6)
 
Joined: Sep 2004
Posts: 1,420
Likes: 1
From: Bettendorf, IA
yeah i think its a power extreme knock off cause my buddy has the greddy pe on his tii and i think on the side of the mufflers it says greddy and i didnt see that on his but correct me if im wrong
Reply
Old Jan 19, 2006 | 09:59 PM
  #6  
rx007racer's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 106
Likes: 0
From: Michigan
Thanks for all the help. And keep the posts a comin' would like to hear from more than the same person. Thats what this thread is for. Just wish i knew whos video it was, cuz found it long time ago and can't remember where i even got it. I find that the exhaust is one of the best I have ever heard.

P.S If anyone knows where i can get a Apexi N1 clip besides the Colin dawg yo clip let me know.
Reply
Old Jan 19, 2006 | 10:03 PM
  #7  
rx007racer's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 106
Likes: 0
From: Michigan
Can you put the PE on an N/A. Sounds like that car is NA cuz, you never hear a blowoff valve. I just love that deep rev. THink he is running cats or a header too.
Reply
Old Jan 19, 2006 | 10:14 PM
  #8  
DriftingB26RX7's Avatar
Porsche-Hunter
Tenured Member 10 Years
iTrader: (4)
 
Joined: Apr 2004
Posts: 2,055
Likes: 0
From: 90041
i like the way that sounds
Reply
Old Jan 19, 2006 | 10:16 PM
  #9  
Jager's Avatar
Tear you apart
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (10)
 
Joined: Aug 2004
Posts: 5,891
Likes: 38
From: Bemidji Minnesota
Its custom. Look at the cans and welds.

I can't tell for 100% sure, I need to see the y-pipe.

Last edited by Jager; Jan 19, 2006 at 10:18 PM.
Reply
Old Jan 19, 2006 | 10:18 PM
  #10  
rx007racer's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 106
Likes: 0
From: Michigan
Looked in Media Player and found the site that the video came from but do not know who's video it is or how i stumbled to that site I guess ill try to do some searching and maybe I'll find out the setup the website it is from is below.


http://hilltop.bradley.edu/~jjarvis/Exhaust.wmv
Reply
Old Jan 19, 2006 | 10:23 PM
  #11  
90FC's Avatar
Dark Side
Tenured Member 15 Years
 
Joined: Sep 2005
Posts: 443
Likes: 11
From: Indiana
RX7.com has a GReddy Power Extreme Exhaust.
Reply
Old Jan 19, 2006 | 10:29 PM
  #12  
Jager's Avatar
Tear you apart
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (10)
 
Joined: Aug 2004
Posts: 5,891
Likes: 38
From: Bemidji Minnesota
Originally Posted by rx007racer
Can you put the PE on an N/A. Sounds like that car is NA cuz, you never hear a blowoff valve. I just love that deep rev. THink he is running cats or a header too.
Yes you can, I believe the inlet is 2.5" on the y-pipe.

!!!!!!
Reply
Old Jan 19, 2006 | 10:32 PM
  #13  
rx007racer's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 106
Likes: 0
From: Michigan
Found Info

Actually went to bradley university's website and searched "jarvis' bcuz if you read the URL it says jjarvis and figured that was the name of the person. Through that they give you his email so i think Im going to email him and ask for some info. Hopefully I can get an answer for all of us.
Reply
Old Jan 20, 2006 | 02:36 PM
  #14  
rx007racer's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 106
Likes: 0
From: Michigan
Got a reply with the setup installed on this car. Its a S4 Turbo II an 88 with a turbo from a 91 with a very large wastegate port. Exhaust is racing beat downpipe, racing beat pre-silencer, and greddy power extreme catback. 3” from the turbo back, no cats and no emissions. So for those of you who love this sound heres all the info to replicate it. Enjoy!
Reply
Old Jan 20, 2006 | 03:08 PM
  #15  
Jager's Avatar
Tear you apart
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (10)
 
Joined: Aug 2004
Posts: 5,891
Likes: 38
From: Bemidji Minnesota
Heh, I was right the first time.

I rock!
Reply
Old Jan 20, 2006 | 03:44 PM
  #16  
Risky Devil's Avatar
U.S.A
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2004
Posts: 1,166
Likes: 1
From: il
I have one for sale. asking $600 w/o shipping, good condition
its indeed a great sounding exhaust, just need something single exit.
email me ca18kid@hotmail.com
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
Jun 20, 2019 10:53 PM
datfast1
West RX-7 Forum
3
Sep 14, 2015 06:58 PM
doritoloco
New Member RX-7 Technical
7
Sep 5, 2015 12:41 PM




All times are GMT -5. The time now is 10:15 PM.