What else do I need ?
07-30-07, 07:54 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2007
Location: Saskatoon, Canada
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
What else do I need ?
Hey guys! So fairly new to the FC club. Wanting to create 280 to 300 pony range out of the car. This is my list so far(not all is installed yet) for engine stuff.
1990 JDM RX-7(single turbo like a turbo2)
Pan speed ECU(supposed to give 15-20 HP, and has fuel cut removed, and mapped to efficiently run .7 bar boost)
Greddy boost controller
FMIC
Koyo rad
HKS BOV
HKS intake
Custum after market exhaust (with downpipe and high flow cat)
Just trying to figure out if I am gonna be where I want to be?
Thanks
1990 JDM RX-7(single turbo like a turbo2)
Pan speed ECU(supposed to give 15-20 HP, and has fuel cut removed, and mapped to efficiently run .7 bar boost)
Greddy boost controller
FMIC
Koyo rad
HKS BOV
HKS intake
Custum after market exhaust (with downpipe and high flow cat)
Just trying to figure out if I am gonna be where I want to be?
Thanks
07-30-07, 10:52 PM
#3
Junior Member
Join Date: Jul 2004
Location: Australia
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like your on the right track for the power your looking for. I'd say maybe do the fuel system fuel pump, secondaries and maybe a fuel pressure regulator.
Then turn up the boost to say 12 psi and see how that goes...
Also if the Pan Speed ecu cannot be retuned or anything, I'd recommend getting a different computer, like a Haltech plug and play computer or the new Motec 2 rotor specific computer.
Then turn up the boost to say 12 psi and see how that goes...
Also if the Pan Speed ecu cannot be retuned or anything, I'd recommend getting a different computer, like a Haltech plug and play computer or the new Motec 2 rotor specific computer.
