2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

What air pressure are you running in 45 & 50 series tires?

Thread Tools
 
Search this Thread
 
Old Jul 17, 2002 | 08:54 AM
  #1  
SureShot's Avatar
Thread Starter
Seduced by the DARK SIDE
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
What air pressure are you running in 45 & 50 series tires?

I'm also want to compare optimum pressure vs. rear camber. All I know is 40 psi in 50 series rears at 2.5 deg camber gives real loose handling.
Reply
Old Jul 17, 2002 | 09:20 AM
  #2  
SureShot's Avatar
Thread Starter
Seduced by the DARK SIDE
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
The label on the tire says max 45 psi. So is 25 psi too low?
Reply
Old Jul 17, 2002 | 09:26 AM
  #3  
Barwick's Avatar
SCCA Rookie
Tenured Member 20 Years
 
Joined: May 2001
Posts: 1,936
Likes: 0
From: Sterling Heights, MI
if you're going higher speeds, they recommend inflating them more. I just got my '90 TurboII so I'm not sure. Plus one tire has a slow leak
Reply
Old Jul 17, 2002 | 09:30 AM
  #4  
Felix Wankel's Avatar
Super Newbie
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 4,398
Likes: 1
From: Birmingham, AL
I usually run about 32-35 psi cold since its so hot here, and pressure builds up with heat.
Reply
Old Jul 17, 2002 | 04:39 PM
  #5  
mazdaspeed7's Avatar
mad scientist
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 2,665
Likes: 2
From: Savannah, GA
I set mine to 42 PSI when theyre hot.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Rotospectre
New Member RX-7 Technical
3
Mar 28, 2018 03:33 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
Wolf_
Single Turbo RX-7's
3
Aug 11, 2015 04:23 PM




All times are GMT -5. The time now is 04:20 PM.