Wastegate install
#1
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Canada
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Wastegate install
Ok never done this before so i need your guy's help. I have everything bolted up but there 2 lines on the wastegate, they are under the spring housing. I don't know where they go. I think one goes to the nipple on the turbo compressor? And the other goes......? Any help appreciated. O and its a Trust 47mm incase u needed to know. Thx
#3
Lives on the Forum
Aftermarket wastegate?
I doubt you'd get much responses here.
You should try the Single Turbo section.
If you're running unmolested boost, IGNORE THE TOP FITTING.
Connect the bottom fitting to any vacuum fitting along the intake tract - most would recommend trying to get a fitting closest to the compressor housing.
-Ted
I doubt you'd get much responses here.
You should try the Single Turbo section.
If you're running unmolested boost, IGNORE THE TOP FITTING.
Connect the bottom fitting to any vacuum fitting along the intake tract - most would recommend trying to get a fitting closest to the compressor housing.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM