unlocking problem
unlocking problem
well i have a little problem in my 7 the door locking mechanism wasn't working properly and when i needed to transport the car i had to close the door and i did by closing it and then locking the door but now the door doesn't unlock .
i've allready tried to disassemble the door and see if i could unlock it but it seems as the mechanism is jammed any ideas on how to open the door ? and by the way i don't have the key for that door since the last owner had a bit of stupid ingenuity and i have 3 different lock's in my car and i only have the ignition key so any ideas ?
thanks in advance
p.s. i forgot it's an 1987 fc n/a just in case the locks are different and it doesn't have for what i could see central locking
i've allready tried to disassemble the door and see if i could unlock it but it seems as the mechanism is jammed any ideas on how to open the door ? and by the way i don't have the key for that door since the last owner had a bit of stupid ingenuity and i have 3 different lock's in my car and i only have the ignition key so any ideas ?
thanks in advance
p.s. i forgot it's an 1987 fc n/a just in case the locks are different and it doesn't have for what i could see central locking
Last edited by _crazy_crazy_; Mar 25, 2011 at 10:42 AM. Reason: missing information
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM



