Ok, this may have been covered before but i couldnt find the thread....

These injectors are suposedly 720cc's, but without flow-testing them ( They wanted $126 to test them! ) and all i wanted to know if anyone has these installed in their car or knows what they exactly are....

What i know about these are that they are Low imped. and connect with the rectangular plug....

yes i know i have to get a new plug for them to fit and all, suposedly they fit into my S5 though i have to use a resistor for the imped.

by these pics do you have any idea if they officially are 720cc's?...


The one side reads:

DENSO

where as the other side reads:

195500-0900

 

1984-85 RX-7 195500-0900 Peak and Hold 680cc Orange Top


i got that after searching in google your descriptions in your post ..

this was too easy

source
http://starquest.i-x.net/viewtopic.p...fadfb42cc1c76f

 

you gotta start googling man

http://www.witchhunter.com/FlowDataPix/d1955000900.jpg

With a walbro pump they are probably rated 700cc. Blitz 720cc injectors are actually rated at 700 I believe and with an upgraded fuel pump fuel pressure rises slightly making them rated at 720. I believe it is the same with greddy 720s as well.

Also whoever quoted you that much to flow test the injectors is out to rip you off man. You can get injectors cleaned, balanced, blueprinted and flow tested for about $15 each.

 

jesus christ, thats bloody nuts dude....

you guys definitly know your stuff, though i tried for over an hour to find anything on them....

so what are these exactly, because you both kinda gave different opinions....

 

Cant say for sure but most likely rated 680cc (from gslse) with stock fuel pressure and 700cc with walbro or other aftermarket higher flowing pump and slightly higher fuel pressure.

 

hmm, that works dude, thanx....

to be safe i'll probably sell these off and get new one's, i need atleast 780's....

thanx again....