driftin8ez

I just pulled the tranny off my jspec engine and this thing was bolted to it. What is it?

-efini-

You son of a bitch bastard mother ******. Thats an OS GIKEN clutch i believe, there bombassJDMshiznatyo.

GodSquadMandrake

That is a high performance pressure plate/flywheel.

Rx Seven

iTrader: (12)

Its just some worth less after market stuff. Thats the Pressure Plate and Flywheel if you want me to give you some money for them so you can buy some good OEM equipment let me know.

-efini-

aaaaaaaahaha

Digi7ech

iTrader: (1)

Looks like a bomb FEED clutch and light flywheel

Congrats. All I got was a missing BOV and ruined front rotor on my Jspec.

Do some searching for FEED clutches or OS clutches (only thing that rings a bell is OS GIKEN for that part)

Rx Seven

iTrader: (12)

Shhhhhhh!!!!!
You guys wherent suposed to say anything.Oh well.
Looks like you got some nice extras with your engine. Its your Lucky Day.

-efini-

Well just looked it up a bit, the single is the bottom of the line OS GIKEN, but the cheapest i could find it was for 1k w/o Flywheel....thats a come up right there

driftin8ez

:smiley_12
i osaka!

NMJ87T2

iTrader: (8)

driftin8ez

quick question.. The clutch has some life left but when it runs out can i bolt any clutch onto the flywheel or do i have to buy another os clutch?

Carzy Driver

You just about made enough to pay for your jspec. How much does Osaka want these days?

Rx Seven

iTrader: (12)

As long as the surface of the flywheel is in good shape you can just get a new clutch but I would do some more searching to find some more information about you particular setup before buy anything. You might need to get the flywheel resurfaced but I doubt you need to replace it.

10AEturboII

I thought you had to use the same clutch for that flywheel, due to the way it bolts up. Isn't there a cradle that it fits into which is attached to the flywheel. Maybe it is just for twin plate clutch though. Either way you are a lucky SOB.

ilike2eatricers

I'm fairly sure the OS Giken pressure plate and flywheel will only bolt up to another OS Giken disk. Probably the pilot bearings and throw out bearings may be unique as well.

NOPR

man, i thought i was lucky with my exedy stage 2 3 puck.... but jesus! nice!

driftin8ez

ya thanks.. But it seems now if i need to get a new clutch im in for a big hit. Maybe ill call a place that sells the os flywheels and ask them if i can use any clutch, pp, and bearings. Well thanx and enjoy the pics. Try not to drool to much. Im sure ill be making a few more posts in the next couple days when im trying to finish up the swap.

Pat McGroin

Check the clutch and see if it has pucks with rivets, if it has pucks you can replace the individual pads.

rodney87

Damn man there's nothing to that flywheel. How much does that thing weigh? 7-8 lbs?

crashdummy

hell no, that thing is heavy

fastrotaries

I'm sooo throwing acid in your face.

Funkspectrum

iTrader: (5)

dayum....I thought I got lucky with my 9lb chromoly flywheel that came on my jspec...

But your **** is flossin y0!

elnots

That makes me wanna crack open my jspec and check out what's in it! It's like a fortune cookie lol!

*crack* Confucious say, No friction material left on your OE JDM clutch!

That's a bad cookie..... hehehe

88t2romad

how much would that flywheel go for used?

driftin8ez

1 million dollars....