2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Two very hard questions. And easy way to clean injector myself?

Old Jan 13, 2002 | 01:19 AM
  #1  
von's Avatar
von
Thread Starter
Rotary Freak
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 2,941
Likes: 1
From: sandiego, ca
Two very hard questions. And easy way to clean injector myself?

Mine are beyond fuel aditive. I stumble, hesitate and miss. Can i soke them in carb cleaner.

When im crusing at any speed my car misses once every second pushing me forawrd. Anyone know if this is the injectors? I replaced the plugs and wires and still does it. Also adjusted the tps.

Another question. When my car is cold, it stuters under ecceleration like vrrrr eh eh eh eh eh and goes absolutely nowere. Whats up with that? Is that injectors or computer. It only happens when cold and goes away when warm although thiers still that miss and some hesitation?????????????????????????????????
Reply
Old Jan 13, 2002 | 01:58 AM
  #2  
Mykl's Avatar
Senior Member
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 724
Likes: 0
From: Montgomery, Al.
My injectors need some help too. Sometimes it runs strong to the redline, sometimes it stumbles and hesitates a bit.

My plan is to remove them and send them away for a cleaning. Either that or just buy a set of new ones.
Reply
Old Jan 13, 2002 | 04:56 AM
  #3  
SpeedRacer's Avatar
Formula Mazda Driver
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 680
Likes: 0
From: Portland, Oregon, USA
I have taken out my fuel injecots and soaked them in degreaser overnight. Made a huge difference actually. Not as good as having them professionally cleaned, but its cheaper and it works. Got rid of my hesitation(which was pretty bad)completely.
Reply
Old Jan 13, 2002 | 07:39 AM
  #4  
7Rebel's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 182
Likes: 0
From: Somewhere
I used the Chevron with Techron fuel additive injector cleaner and I did notice a difference. But I think the best way would be to send your injectors out to be cleaned.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:02 AM.