2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

two questions in one.? anyone.?

Thread Tools
 
Search this Thread
 
Old Jun 24, 2004 | 10:50 PM
  #1  
1990_whitecomet's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 228
Likes: 0
From: CA
two questions in one.? anyone.?

as i've tried servel times.. taking off my door covering to check on my door speakers and my window.. but everytime i do try.. the dAng* cover never seems to be comming off.. nor waNna and as i don't want to make force into anything.. i have not remove that door cover off.. but im curious how do i and what right way am to.? as in without breaking or harming my seven or any of that sort.. there's a pin in the window scroller. but i don't see one there.? but is there on.?!!? well guys.. have any one tried yet or they can give me some clues on how to.. its on the s5 manual windows.. without the power windows.. also.. for the mirrors.. where is that power mirror located and am i to get one out..mine's dyIn on me and waNna digg it out.. but yea, thats alot of talking and explaing but hopfully you guys can help me out here.. thanks..
Reply
Old Jun 24, 2004 | 10:55 PM
  #2  
scheistermeister's Avatar
Throbbing Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 853
Likes: 0
From: Cincinnati, OH
well there are plastic clips that you need a clip puller to pop out and as for the manual windows if you push back on the cap thats touching the panel there is a C clip that you have to pop off, you can usually use a flat head screwdriver for it. then on mine (87 SE) there are metal clips that hold the top, if you slide it forward or backwards if should come off.
Reply
Old Jun 24, 2004 | 10:59 PM
  #3  
WAYNE88N/A's Avatar
Lives on the Forum
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 5,721
Likes: 3
From: Coldspring TX
There's a clip that holds the "window scroller" (Texans call it a window handle) on to the shaft...If it's like an S4, you need to get a small strip of rolled-up cloth, or some flexible wire, get it under the handle, and pull towards the long part of the handle, the clip should pull out after a try or two. There are also 2 screws holding the door liner on, and 4 screws holding the stationary handle on, you have to pop the little "cap" off for the front one...After popping all of the hidden "plugs" out from the front, bottom, and back of the liner, the liner should be pushed up slightly to clear the top clips from the sill....
Reply
Old Jun 24, 2004 | 11:09 PM
  #4  
1990_whitecomet's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 228
Likes: 0
From: CA
okay kOol.. that helps alot guys but yea.. them clips i forgot to mention i got them off too..just umm what WAYNE88N/A said. i got it! thanks,.. i'll do that and umm you know what i mean ahahaa..>>>>There's a clip that holds the "window scroller" (Texans call it a window handle)<<<< or other words that too. ahaha.. thanks guys... now what about that power mirror.? where is the motor to that, or umm located.? and how do i get one out. or tips on taking one out.. my mirror motor is just shot.. not working as it should anymore.. but yea thanks guys..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM
Frisky Arab
2nd Generation Specific (1986-1992)
5
Sep 4, 2015 06:17 PM




All times are GMT -5. The time now is 08:43 AM.