turning 86 n/a into t2
#1
Junior Member
Thread Starter
Join Date: Jan 2002
Location: Texas
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
turning 86 n/a into t2
i have a burnt up t2 that i plan on taking the turbo off of an placing it on my n/a... can anyone help me get a list of everything that has to come off the t2 and onto my n/a?
#2
Your Opinion is Wrong
Join Date: Feb 2001
Location: Peoples Republic of California
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
To do the swap properlly you should use the whole T2 drivetrain, the T2 Elctronics, and the T2 Fuel system...
It's ussally cheaper just to buy a TII that try to swap it to a NA FC... unless your swaping to a Vert, which makes some sense.
The best way to do this if you REALLY want to is to get a running donor TII and swap the whole drivetrain and suspension peices.
It's ussally cheaper just to buy a TII that try to swap it to a NA FC... unless your swaping to a Vert, which makes some sense.
The best way to do this if you REALLY want to is to get a running donor TII and swap the whole drivetrain and suspension peices.
#3
Junior Member
Thread Starter
Join Date: Jan 2002
Location: Texas
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
I am putting the drivetrain/clutch and rearend on the n/a on saturday. After that i figure the injectors and ecu. there where some thin metal tubes that ran right snug on top of the engine but the rubber ends were melted off in the fire on the t2... what were they?
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM