turn signals..
01-30-04, 04:51 PM
#1
Full Member
Thread Starter
Join Date: Jan 2004
Location: CA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
turn signals..
yea.. my turn signal bulb died on me. or somthing with it.. i don't know, but its not lighting up anymore.. must be the moist.. but. how can you take that blub out.. or is there a certain way that your suppose to open so you can get to the blub.? i try twisting the blub so it could just twist off.. but some how its not even moving..?? so i don't know. anyone got anything.. or have experience changing the blub...
1990_whitecomet
1990_whitecomet
01-30-04, 07:20 PM
#2
Former Moderator. RIP Icemark.
If the bulbs have not been maintained they will corrode into the socket and eventually your light switch will burn out.
To remove the 1156 and 1157 bulbs you will need to first push in the bulb, and then turn it to unlock it.
Make sure you use some conductive grease on the new bulbs when you put them back in to help prevent further corrosion.
To remove the 1156 and 1157 bulbs you will need to first push in the bulb, and then turn it to unlock it.
Make sure you use some conductive grease on the new bulbs when you put them back in to help prevent further corrosion.
Thread
Thread Starter
Forum
Replies
Last Post
RyanFox
New Member RX-7 Technical
7
09-18-15 09:09 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
09-16-15 06:16 PM