Turbo Manifold
#1
RX-7 n00b..!
Thread Starter
Join Date: May 2007
Location: Hull, Quebec
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Manifold
my friend has a turbo manifold for sale since he sold his turbo rx7 a while back and want to sell me a manifold like this
would i see a difference over stock and will this last longer than the stock one.. because i know the stock crack after a while and im going for a higher boost.. maybe 10-11 psi over the stock psi which i dunno what it is..
Thanks
would i see a difference over stock and will this last longer than the stock one.. because i know the stock crack after a while and im going for a higher boost.. maybe 10-11 psi over the stock psi which i dunno what it is..
Thanks
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Basically what he said. It's for a T4 style turbo which will not fit the stock S4 or S5 turbo unless you weld on an adapter flange (to the manifold). Also it looks a bit like the cheap eBay manifolds that tend to crack and fit poorly. In addition, it's an undivided design which is far inferior to the divided as far as turbo response goes.
#4
RX-7 n00b..!
Thread Starter
Join Date: May 2007
Location: Hull, Quebec
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
he has the extender your talking about.. but yeah i looked it up and its look likes its the same has ebay.. so its not worth it...?
i should stick with the stock for now
i should stick with the stock for now