Turbo conversion ecu error code 7
#1
Junior Member
Thread Starter
Join Date: May 2016
Location: Puerto Rico
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Turbo conversion ecu error code 7
I just finished an NA to turbo conversion, all of the needed components are in maf n318, boost sensor n318 and the ecu n318. Now the issue im having is that the ecu is not reading the boost sensor and i get error code 7. I troubleshooted and did all the steps as in the fsm and everything is fine on the voltage readings. I have two n318 ecu's and one n326 the n326 will not throw code 7 but both n318s do. Are the pins on the n318 ecu different than an n332? I am really stuck here and cannot find a similar problem on the forums.
The wiring harness is NA everything, the readings on pin 2b are correct what am I missing?
Thanks for the help in advance.
The wiring harness is NA everything, the readings on pin 2b are correct what am I missing?
Thanks for the help in advance.