Transmission swap Q's
#1
Rotary Lover
Thread Starter
Join Date: Apr 2007
Location: Buenos Aires, Argentina
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Transmission swap Q's
I was wondering...
What do I need to swap and mate a Turbo (be it S4 or S5) transmission with a S4 NA engine?
Other than the driveshaft... do I need to change the flywheel, starter or something?
Thanks in advance for your feedback!
What do I need to swap and mate a Turbo (be it S4 or S5) transmission with a S4 NA engine?
Other than the driveshaft... do I need to change the flywheel, starter or something?
Thanks in advance for your feedback!
#2
Full Member
Join Date: Jun 2011
Location: Pittsburgh, PA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
S4 N/A engine to a TII Trans:
TII flywheel,starter,Clutch slave.Clutch and Pressure plate.
The Driveshaft depends on whether you are mating to an N/A diff.
then you would need a Conversion shaft to make the TII trans hook to the N/A diff.
Otherwise it would be better to have all TII rear components.
HI DANNO!!!
TII flywheel,starter,Clutch slave.Clutch and Pressure plate.
The Driveshaft depends on whether you are mating to an N/A diff.
then you would need a Conversion shaft to make the TII trans hook to the N/A diff.
Otherwise it would be better to have all TII rear components.
HI DANNO!!!
#4
This sh*t burns oil!
iTrader: (7)
The Tii trans will bolt up the n/a engine.
You need a Turbo flywheel thats matches your engine(s4 engine gets s4 turbo flywheel).
You need a turbo clutch kit to go with it.
You need a turbo starter.
You need a turbo driveshaft with a n/a diff flange unless you change that also.
my car was originally atx so I cant comment on the cross member, but i am almost positive that n/a one works with the turbo trans mounts.
You need a Turbo flywheel thats matches your engine(s4 engine gets s4 turbo flywheel).
You need a turbo clutch kit to go with it.
You need a turbo starter.
You need a turbo driveshaft with a n/a diff flange unless you change that also.
my car was originally atx so I cant comment on the cross member, but i am almost positive that n/a one works with the turbo trans mounts.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM