Hey my car doesn't shift into gears very well and when i do get into geear i hear a squeaking noise that wasn't there before. Any idea what this is? The transmission i think is ok but i don't know about the throwout bearing. I need help bad on this as this is my only way to get around.

Please help

 

did u try all gears? If it dosent go into one gear but gose into others, it could be a synco, or shift fork.
Is the sqeaking in all gears?
Here are similar threads:"Something wrong with tranny...gear shaft?", "Trans sticks in 4th, need help.", "S4 5-speed tranny problems."

 

It pretty much grinds in every gear i guess i took off the tranny to examin everything and it all seems to work so i figured the clutch is prolly pretty old so i ordered a new one. I had a friend push in the cluch to see if it worked ok the trust bairing seems to work good. Am i right to do this the trans works pretty good it just doesn't shift into gear.

 

did u bleed ur clutch cylinder? u might have built up air in there and doesnt give enough clearance so u end up grinding into gear.

 

yep thats the first thing i tryed

 

also when i tryed to shift into gear it would grind the **** out of them like the clutch pedel wasn't even depressed. I checked the throwout bearing seems ok a little worn, the pressure plate looks like it needs to be replaced. Anyone else relate to this problem?