1987RX7guy

iTrader: (3)

Ok well hopefully I can get my TB mod done this month and set it up in my car. My question is dealing with the cooling lines that are removed with the TB mod...
I have an AT radiator in my car from an 88 gxl I was wondering about the little hook-ups on it for the tranny fluid I don't want to waist that area so could I flush it out and run the coolant lines from the block to the nipples for like 1% more cooling


Santiago

Icemark

If you really wanted to be ****, you would be better off running the AT radiator lines to a small pump and secondary radiator in front to get extra cooling.

You won't get any extra cooling using just the AT section.

1987RX7guy

iTrader: (3)

Like that?

Red lines to the engine.


Santiago

Icemark

yeah except the red lines would tie together, rather than run to the engine

1987RX7guy

iTrader: (3)

What kind of a pump should I look for? ooh could I use this with some sort of a cooling jacket for the oil filter? Anyone think it would be worth it? I know oil cooling is not really a problem with us but cooling is cooling right?

Santiago

Icemark

do you really have that much of an overheating problem that you are looking for that last 1% of extra cooling???

1987RX7guy

iTrader: (3)

lol
I don't have any cooling problems my guage never goes above 1/4 guage in 100+ temps I just wanted to use the space.

Santiago

Icemark

so you're gonna add 15-20 lbs extra weight to get extra cooling???

LOL