Trailing spark problem
#1
Full Member
Thread Starter
Join Date: Nov 2003
Location: NM
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Trailing spark problem
I have a turbo S5 with micro tech eco installed in my 1st gen. I need the wiring for the trailing coil. The ground wire from the trailing coil keeps burning up on me. any help on this wiring would help me out or any reason the ground wire keeps burning out on me?
Thanks
Thanks
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Ain't no ground wire on the trailing coil ASSY. See the FAQ thread on this site for a download of the series five wiring. And if it's not there, go to ROTORWIKI and find it there.
Both lead and trail coil assy's get their gnd from the coil assy base touching the chassis. As in the bolts/studs that hold it to the chassis.
If your talking just a single coil without the ignitor, then I've no clue.
Both lead and trail coil assy's get their gnd from the coil assy base touching the chassis. As in the bolts/studs that hold it to the chassis.
If your talking just a single coil without the ignitor, then I've no clue.
#3
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Have you tried the Micro Tech Forum?
https://www.rx7club.com/forumdisplay...ysprune=&f=111
http://www.microtech-efi.com/support/downloads.html
https://www.rx7club.com/forumdisplay...ysprune=&f=111
http://www.microtech-efi.com/support/downloads.html
Last edited by HAILERS; 11-06-08 at 08:05 AM.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM