trailing coils and tach work then die
#1
Junior Member
Thread Starter
Join Date: Sep 2004
Location: PIKEVILLE TN. 37367
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
trailing coils and tach work then die
need some help guys
my trailing ciols and tach work for a few seconds when u first start the car.
then they die no spark no tach.
replaced plug wires and plugs.
checked wires and connections no luck..
my trailing ciols and tach work for a few seconds when u first start the car.
then they die no spark no tach.
replaced plug wires and plugs.
checked wires and connections no luck..
#2
Full Member
iTrader: (1)
Join Date: Oct 2005
Location: chesapeake, VA
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
remove the leads from each of the trailing coils(2 leads on each, small nut, about 7mm). Use a fluke and ohm the primary of both the coils. should be 0.2 to 1.0 ohm. if they both read this value, then the igniter is bad or your 2 white plugs for that coil pack set are either not plugged in all the way or dirty. stephen.
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM