TPS adjustment skrew...... gone.. I swear
#1
Senior Member
Thread Starter
Join Date: Sep 2002
Location: "You take my car, I take your knee caps"
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
TPS adjustment skrew...... gone.. I swear
Ok, first of all, I searched, Iv read, Iv looked at it all, but I still cant figure this out.
I made the 2 led lamp set up and pluged it into the green 3 wire conector (im assuming the one coming out of the same harness as the pressure sensor).
Now, I can find the TPS adjustment skrew, I dont know if my lights are even working cuase neither come one. What am I doing wrong, and which skrew do I turn, i see 2, one has a little white plastic cap on it and i didnt get any difference when i turned it, and one is on the throttle body itself and is like inside a nut, also no result when turning that. where is it? and this is on an s5 n/a. Could my lights be wrong? (I dought it, 1 positive 2 negitive, positive intertwined inot one.) wrong conector? why is this sooo damn hard?
-Adam
I made the 2 led lamp set up and pluged it into the green 3 wire conector (im assuming the one coming out of the same harness as the pressure sensor).
Now, I can find the TPS adjustment skrew, I dont know if my lights are even working cuase neither come one. What am I doing wrong, and which skrew do I turn, i see 2, one has a little white plastic cap on it and i didnt get any difference when i turned it, and one is on the throttle body itself and is like inside a nut, also no result when turning that. where is it? and this is on an s5 n/a. Could my lights be wrong? (I dought it, 1 positive 2 negitive, positive intertwined inot one.) wrong conector? why is this sooo damn hard?
-Adam
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM