Torque specfications
11-03-03, 10:25 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2003
Location: Warren, PA
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Torque specfications
Someone told me that the torque specs for the flywheel on a 88 Rx-7 is 289-362 ft/lb. Is that right ? Thats a large range. The pressure plate gets torqued to 13-20 ft/ lb ? Are these numbers right ?
11-03-03, 11:10 PM
#2
Seems kinda silly, dosent it? But the Flywheel is 350 ft/lb. Ive taken several of those off. It is a 2 person job, minimum.
As far as retightening that sucker. Take it up to 150 ft/lbs and then an additional 1/6 of a rotation. Most people don't have a torque wrench that goes past 150, that is how I do them.
As far as retightening that sucker. Take it up to 150 ft/lbs and then an additional 1/6 of a rotation. Most people don't have a torque wrench that goes past 150, that is how I do them.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM