Top Speed Pro 1 Exhaust
#1
Junior Member
Thread Starter
Join Date: Jul 2017
Location: Florida
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Top Speed Pro 1 Exhaust
Hi guys, I'm looking for exhaust for my rx7 fc. did somebody know about this one,
https://www.ebay.com/itm/TOP-SPEED-P...RaEtqU&vxp=mtr
https://www.ebay.com/itm/TOP-SPEED-P...RaEtqU&vxp=mtr
#2
roTAR needz fundZ
iTrader: (1)
doesn't look bad, BUT
1: I would ask them what the mufflers internal material is, as most mufflers cannot hold up to rotary temps and blow out quick
2: if this is a N/A your putting it on, if your 5th/6th ports are working now with stock exhaust, they won't with this, depending on series
3: if putting this on a turbo car, your gonna have to take your manifold off also and port the wastegate or your gonna boost creep bad
1: I would ask them what the mufflers internal material is, as most mufflers cannot hold up to rotary temps and blow out quick
2: if this is a N/A your putting it on, if your 5th/6th ports are working now with stock exhaust, they won't with this, depending on series
3: if putting this on a turbo car, your gonna have to take your manifold off also and port the wastegate or your gonna boost creep bad
#3
Junior Member
Thread Starter
Join Date: Jul 2017
Location: Florida
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
doesn't look bad, BUT
1: I would ask them what the mufflers internal material is, as most mufflers cannot hold up to rotary temps and blow out quick
2: if this is a N/A your putting it on, if your 5th/6th ports are working now with stock exhaust, they won't with this, depending on series
3: if putting this on a turbo car, your gonna have to take your manifold off also and port the wastegate or your gonna boost creep bad
1: I would ask them what the mufflers internal material is, as most mufflers cannot hold up to rotary temps and blow out quick
2: if this is a N/A your putting it on, if your 5th/6th ports are working now with stock exhaust, they won't with this, depending on series
3: if putting this on a turbo car, your gonna have to take your manifold off also and port the wastegate or your gonna boost creep bad
#4
roTAR needz fundZ
iTrader: (1)
If you want "good" and not take any chances with "cheap", bite the bullet and get a system from racing beat. They are proven to gain some ponies, and proven to last
But, as i said, being a turbo, if your going from stock exhaust to anything that removes the cats, you must port your wastegate
But, as i said, being a turbo, if your going from stock exhaust to anything that removes the cats, you must port your wastegate
Thread
Thread Starter
Forum
Replies
Last Post
rexset
3rd Generation Specific (1993-2002)
7
05-19-05 04:21 PM