tips for getting the front off
10-12-03, 01:42 PM
#1
Full Member
Thread Starter
Join Date: Feb 2002
Location: the great below
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
tips for getting the front off
i need to get the front bumper of of one of my sevens to fix up some body damage. i have all the bolts out but the two vertical peices on each side don't want to come off. anyone have any tips for removing them?
10-12-03, 01:57 PM
#2
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,624
Likes: 0
Received 2 Likes
on
2 Posts
there are bolts that come from the fender -> bumper, and at the top there are studs coming from the bumper that run through the fender and are bolted way at the top. Quite the PITA to get to.
10-12-03, 04:07 PM
#3
Rotary Freak
Join Date: Dec 2001
Location: chandler, AZ
Posts: 2,402
Likes: 0
Received 0 Likes
on
0 Posts
having my arm wedged in the the wheel well under the fender for 30min trying to get those=not fun at all. some of the higher ones, I was able to get at from underneath the headlight when i had them up.
10-12-03, 04:17 PM
#4
Former Moderator. RIP Icemark.
Originally posted by 2a+RoN
having my arm wedged in the the wheel well under the fender for 30min trying to get those=not fun at all. some of the higher ones, I was able to get at from underneath the headlight when i had them up.
having my arm wedged in the the wheel well under the fender for 30min trying to get those=not fun at all. some of the higher ones, I was able to get at from underneath the headlight when i had them up.
Thread
Thread Starter
Forum
Replies
Last Post