I recently drained the fluid. There are two bolts, one is highed then the other and I assume that it is for draining and the other for filling. I was hearing a clunk at idle coming from the general trans area so I wanted to check fluid levels, seemed low so I put around .4 quart in. my car has some mods in sig.

After I filled my trans to the top of the higher up bolt I noticed that it would leak a lil bit on my downpipe and genereally anywhere under the car from the filler bolt.

how can I tell how much oil to put in the trans ? the fsm said 2.6 quart i believe and I originally did that. did I over fill it and have extra coming out ? I used some tread sealer on the bolt I took off.

what are your thoughts?

 

Weird that its leaking with the thread sealer. Try replacing the plug.