2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

TII swap cranks but no boom, advice appreciated

Thread Tools
 
Search this Thread
 
Old 08-26-05, 08:06 PM
  #1  
JGTC every day.

Thread Starter
iTrader: (2)
 
SAMIboarder's Avatar
 
Join Date: May 2005
Location: Olympia, WA
Posts: 478
Likes: 0
Received 0 Likes on 0 Posts
TII swap cranks but no boom, advice appreciated

I posted this in the NW section already, but figured there's more TII owners out here:

TII swap is soooooo cloooooose. I got it in and all buttoned up, she cranks but won't fire. there is fuel pressure and pump is working, but the injectors aint injectin. I did replace all the injector clips w/ new ones, but I am damn sure I wired them up correctly. but there is no fuel entering the engine whatsoever. I am wondering what the large white(round or oval) plug by the AFM plug is tho... anyone know? and yes, the fuel lines are hooked up correctly.

well any ideas are appreciated, I hope its somethin simple. this is the 1st time I have installed a motor in the FC and it ain't the original!

btw, motor is S4 j-spec and harness/ecu is S4 u.s.
Old 08-26-05, 09:14 PM
  #2  
JGTC every day.

Thread Starter
iTrader: (2)
 
SAMIboarder's Avatar
 
Join Date: May 2005
Location: Olympia, WA
Posts: 478
Likes: 0
Received 0 Likes on 0 Posts
welp, it ain't the fuse by the drivers strut tower. anybody know if the injectors ground to the ecu or elsewhere? I know there is a ground under the throttle body, and the one that comes off the tranny to the firewall....that's all I can think of, any others I should check?
Old 08-26-05, 09:16 PM
  #3  
400WHP or bust

iTrader: (7)
 
Nismo Convert86's Avatar
 
Join Date: Oct 2003
Location: Walkerton, Ontario Canada
Posts: 4,048
Likes: 0
Received 0 Likes on 0 Posts
The injectors are what got me too, forgot the one under the TB, and I also forgot to plug in the resistor pack on the pass. side fender.
Old 08-26-05, 11:12 PM
  #4  
pp

 
tIIsleeper's Avatar
 
Join Date: Aug 2005
Location: Central Massachusetts
Posts: 768
Likes: 0
Received 0 Likes on 0 Posts
Just make sure and check the timing and the spark.
Old 08-27-05, 12:47 AM
  #5  
JGTC every day.

Thread Starter
iTrader: (2)
 
SAMIboarder's Avatar
 
Join Date: May 2005
Location: Olympia, WA
Posts: 478
Likes: 0
Received 0 Likes on 0 Posts
got it! my 88 n/a didn't have a resistor so I jacked one off my friend's 87 parts car. she runs quite rough, but hell yeah.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
Spriggs
Introduce yourself
1
08-20-15 03:33 AM



Quick Reply: TII swap cranks but no boom, advice appreciated



All times are GMT -5. The time now is 09:41 AM.