Does anyone know if a turbo driveshaft, diff and halfshafts will mount into an 86 N/A. Im not lookin at power handling way beyond stock, but Ive almost destroyed my second drive shaft in my streetport 86na.
I slide in parking lots often, clutch kick. Im probally going down to pick up an NA LSD but I was wondering if I should just replace everything. My tranny is fine and seems to handle all the power I can make.
Thanks
SKY

 

Drive shafts are different. You will need to get a custom one fabricated or get a TII tranny and attach it to the engine. I think the TII driveshaft is shorter. The diff and halfshafts fit.

 

Actually, they are the same length. The difference is in the spline count and the bolt pattern at the differential.

Dan

 

drill new holes into the flange on the diff, to compensate the turbo driveshaft, then have some welding done to reinforce the area since the bolt pattern is little further out compared to the n/a