TII aftermarket Fuel regulator/ No PD ?
07-28-04, 08:26 PM
#1
Full Member
Thread Starter
Join Date: Mar 2003
Location: Somewhere
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
TII aftermarket Fuel regulator/ No PD ?
I have a 86 TII and my Pulsation dampner is leaking. I have been told that if I get a aftermarket fuel regulator like a SX , that these will second as a dampner. I was wondering if this is true. If so that would be great, because its cheaper than buying a new PD. Any info would be great, and yes I have searched.
P.S. What would I do with the stock FPR.
P.S. What would I do with the stock FPR.
Last edited by Sammytom; 07-28-04 at 08:29 PM.
07-29-04, 12:19 PM
#4
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
You could also get one of the billet primary fuel rails that some dude is selling on EBAY.. I have one, its about twice as big inside diameter as the stock one, it fits in the stock location and should aid in avaidong pulsation along with the FPR. (comes with AN fittings, but you can ghange them to hose barbs if you want to keep the stock lines.
07-30-04, 09:43 AM
#5
Full Member
Thread Starter
Join Date: Mar 2003
Location: Somewhere
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Ok, so what do i do with the factory FPR. Do i just cap the vac nipple, or should I get aftermarket rails. Where can I get some cheap rails. I dont need anything over the top, just a stock replacement with a little room for upgrades. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM