2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Throttle Issues, S4 NA, Sputter & Stalling

Thread Tools
 
Search this Thread
 
Old 09-16-08, 01:12 AM
  #1  
Senior Member
Thread Starter
 
jmkogut's Avatar
 
Join Date: Aug 2008
Location: Washington
Posts: 409
Likes: 0
Received 0 Likes on 0 Posts
Throttle Issues, S4 NA, Sputter & Stalling

So I've been driving this car perfectly fine, right. It's been totally happy, no completely major problems.

It overheated once, but I shut it off quickly. I still think coolant seals are going out, but I'm not sure. My water pump seal *is* damaged, and does drip. I have a replacement due to arrive on Wednesday.

I drove the car, no problems, it was happy. It sits for about 30 minutes tops, and I tried to start it and it just falls on its face around 800 to 1000 rpm. It IDLES around 1000 (no tach but judging from sound) I crawled home at 15mph, around 800rpm in first gear. I had to hold my foot juuust on the throttle, any slight amount of pressure and it would sputter and loose all power.

I've been looking around, and I think it's a vacuum line, only problem is, I can't see anything that fell off. I'll check the plugs in the morning to see if they're wet, but I don't think the problem is internal. It has to be something externally.

Pictures, PLEASE. If any of you have any idea.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
barkz
Power FC Forum
37
11-21-20 09:34 AM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
Steven_McKinley
General Rotary Tech Support
12
09-05-15 10:48 AM
rx7shirley
2nd Generation Specific (1986-1992)
6
09-02-15 02:11 PM



Quick Reply: Throttle Issues, S4 NA, Sputter & Stalling



All times are GMT -5. The time now is 01:58 AM.