Thread for all ported 6 port owners
#1
Rotary Enthusiast
Thread Starter
iTrader: (25)
Join Date: Sep 2003
Location: Melbourne, FL
Posts: 1,440
Likes: 0
Received 0 Likes
on
0 Posts
Thread for all ported 6 port owners
WHat idle do u run ur streetport at? Mine runs usually at 1000... But after polishing the trottle body and the manifolds it seems to surge so right now I have it set at 1300... IS this way to much? ill try to take it down to 1100 tomorrow and see if it surges again.
#2
Former Moderator. RIP Icemark.
mine idles a little high at around 750-800, but nothing like 1000.
Now when it was first set up and being broken in, it was running at around 1000... but thats been tuned down.
Now when it was first set up and being broken in, it was running at around 1000... but thats been tuned down.
#4
i am legendary
Join Date: Sep 2003
Location: Kirkland, WA
Posts: 8,478
Likes: 0
Received 0 Likes
on
0 Posts
1500 during break-in and I've ran anything between 800 and 950 since then. It idles perfect at 800 (this is with no 6pi system and combined 2nd/aux port so its open all the time too), but later I was playing with timing and advancing it and with advanced timing the idle gets lumpier at 800, so I bumped it up to 900/950 and it was smoother there.
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM