i need pics of steel braded brake lines, particularly on the REAR... i'm wondering if there is actually a difference between the brake LINES for the solid rotor calipers and the vented rotor calipers. hell, i'm thinking even the FD lines are the same...

post up some pics of your stainless lines!

 

here are the pics from mazdatrix you can tell the differences in the front lines but it also looks like there are some differences in the rears too.

http://www.mazdatrix.com/j-sslines.htm

if no one put up pics for the Vented rears ill go take some tomorrow

EDIT: forgot link

 

one of my stainless brake likes rubbed my tire cause i forgot to ziptie it down

so the whole point is i'm trying to construct a rear brake line so i dont have to buy another whole freakin set of 4 lines...

and i'm thinking i can do so with these: and some -3AN hose




but i need some pics of the aftermarket lines to make sure

 

hello there

 

You should never have to use zip-ties on brake lines. The front lines should have a fitting part-way along the line to clamp the line to the strut and the rears are too short to be anywhere near the wheels (well they're supposed to be). If you're making custom lines you should find a set of stock lines to copy. They don't rub the wheels...