wthdidusay82

iTrader: (15)

http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting

i tested my injectors on ohmmeter and read 12.8-13 ohms so i figure they must be high impedance, the clip where it clips on it has the notch on the outside offset and there is a notch in center inside(where the metal clips are), they look orangish so i dont see how they were ever purple tho (info from rotaryressurection.com)

soundwavetsunami

Those're the S4 NA ones. They're low-impedance so you don't need the resistor pack. I've got a matching set in my garage.

NZConvertible

13 ohms is not low impedance...