is there any interchangeable internal electrical parts accross the mazda/ford family?
#1
Full Member
Thread Starter
is there any interchangeable internal electrical parts accross the mazda/ford family?
specifically im asking about the power window switches. i took my door panels off and the internals of the passenger side fell apart. the housing is ok, but the internals are missing all the springs and plastic goodies. so i was just wondering if any other mazdas or fords out there have the same internal connecters or mechanisms. because if i can get the guts out of a miata or mustang switch for $20, i wont have to spend $70+ on an rx7 part.
ive got a 91
ive got a 91
#3
Warheads on foreheads!
iTrader: (8)
check this for an idea of the years - its a Mazda MPV btw.
1991 1992 1993 1994 1995 Mazda MPV Master Power Window Switch 2dr Light Blue | eBay
1991 1992 1993 1994 1995 Mazda MPV Master Power Window Switch 2dr Light Blue | eBay
#5
Full Member
Thread Starter
omg thakyou guys! ive been looking around and the closest i could find was out of a mid-late 90's protege
95 96 97 98 Mazda Protege Passenger Power Window Control Switch | eBay
my plan was to see if i could pull the switch out of the trim and rig it up into my housing
95 96 97 98 Mazda Protege Passenger Power Window Control Switch | eBay
my plan was to see if i could pull the switch out of the trim and rig it up into my housing
#7
Full Member
Thread Starter
k, ill go to pick n pull tomorrow and browse around, hopefully one of the mpv's the have will have one. as for the wires, i guess ill have to do trial and error... how complicated can a 5 wire system be? :P
or just maybe ill get lucky and the rx7 they have there will have power windows...
or just maybe ill get lucky and the rx7 they have there will have power windows...
Trending Topics
#8
Cake or Death?
iTrader: (2)
Here is a writeup on MPV switches.
You cannot transfer the switch itself into the FC mounting plate, don't bother trying.
The MPV plate is slightly longer, it doesn't want to pop in as easily as stock.
You cannot transfer the switch itself into the FC mounting plate, don't bother trying.
The MPV plate is slightly longer, it doesn't want to pop in as easily as stock.
#11
Full Member
Thread Starter
this is just an update, i went to the salvage yard and unfortunately someone else got the switch out of the rx7, but i did make off with an undamaged center console to replace mine, a straight sunroof to replace my wavy dented one, a shifter boot and some switches out of an MPV (the passenger one plugged right in)
and from reading about an electric fan mod here on the forums, i got the fan shroud out of a nissan quest, ill install that one later
https://www.rx7club.com/2nd-generati...ic-fan-895916/
luckily the lady that rang me up was susceptible to flirting so i walked out the door with all this stuff for $60
thanks for the help guys, i love you all
and from reading about an electric fan mod here on the forums, i got the fan shroud out of a nissan quest, ill install that one later
https://www.rx7club.com/2nd-generati...ic-fan-895916/
luckily the lady that rang me up was susceptible to flirting so i walked out the door with all this stuff for $60
thanks for the help guys, i love you all
#13
Full Member
Thread Starter
#15
Full Member
Thread Starter
my car was an automatic and the rubber boot on the shifter was torn to shreds, so ive got air flow coming through pulling heat from the exhaust, and the a/c was removed, and the people i give rides to, give me money, trust me, im their last resort because they know how bumpy and hot a ride from me is :P
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
08-11-15 10:30 PM