Tanabe GF210 alternative?
Thread Starter
Joined: Feb 2001
Posts: 1,259
Likes: 4
From: long island
Tanabe GF210 alternative?
I've been trying to find a set of springs for my 88 fc, since after sitting for 10 years, the ones on there are rusted. Unfortunately, the TGF032/GF210 from Tanabe are no longer in production, and I can't find anyone with stock.
I'm running oversized wheels in the front, so I'd like to find a spring known to have good clearance, as the Tanabe's do.
Are there any comparable alternatives? They'll be used with a set of KYB AGX.
I'm running oversized wheels in the front, so I'd like to find a spring known to have good clearance, as the Tanabe's do.
Are there any comparable alternatives? They'll be used with a set of KYB AGX.
Back when the GF210s came out, RSR released their "race" down springs that were also popular. Search for a comparison of the two.
If you want some RSR race springs, then I have a good used set of four that I'll let go for $125.
If you want some RSR race springs, then I have a good used set of four that I'll let go for $125.
Thread Starter
Joined: Feb 2001
Posts: 1,259
Likes: 4
From: long island
want the 1.5" drop, though. rsr race down not as much
Thread Starter
Joined: Feb 2001
Posts: 1,259
Likes: 4
From: long island
Thread Starter
Joined: Feb 2001
Posts: 1,259
Likes: 4
From: long island
Trending Topics
What oversize wheel are you running up front?
The front coil tends to be fairly large, compared to the rear. If you need clearance, then I'd recommend the ground control coil sleeves.
The front coil tends to be fairly large, compared to the rear. If you need clearance, then I'd recommend the ground control coil sleeves.
Thread Starter
Joined: Feb 2001
Posts: 1,259
Likes: 4
From: long island
Thread
Thread Starter
Forum
Replies
Last Post
RE_GTUs
2nd Generation Specific (1986-1992)
3
Jun 17, 2006 08:40 AM






