2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

take off problem

Thread Tools
 
Search this Thread
 
Old 10-22-10, 11:26 PM
  #1  
(>'-')>
Thread Starter
 
likeapooch's Avatar
 
Join Date: May 2008
Location: Detroit Michigan
Posts: 204
Likes: 0
Received 0 Likes on 0 Posts
take off problem

so i finally have all the problems in my fc fixed except for one, when i try to take off from first gear i get a slight jerk then my fc will accelerate very slowly, and it may be running rich. the things ive already fixed are oil leak and radiator leak that were affecting my clutch, new clutch and cleaned flywheel (obviously). i thought my oily clutch was causing the problem but my car is still slow. this is a rebuilt motor and doesnt have more than 4000 miles on it and i have a straight pipe exhaust. oh yeah also when the car is cold and i step on the gas, it feels like its miss firing and i cant rev my engine smoothly. any opinions would be greatly appreciated

87 na
Old 10-23-10, 12:27 AM
  #2  
Senior Member

iTrader: (1)
 
Blackfc3srx7's Avatar
 
Join Date: Jan 2007
Location: Mount Vernon, Washington
Posts: 321
Likes: 0
Received 0 Likes on 0 Posts
Is your tps adjusted to spec once warm? Also your thermo sensor could be causing a problem if you have cold issues. First I would have to check to see if you still have the double throttle valve setup and the throttle body hasn't been messed with.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WyomingTII
2nd Generation Specific (1986-1992)
12
09-28-15 10:32 AM
lnlreaper
2nd Generation Specific (1986-1992)
2
09-27-15 09:59 AM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM



Quick Reply: take off problem



All times are GMT -5. The time now is 09:42 PM.