Taillight conversion, problem thingy majiggy!

Reply Subscribe

Thread Tools

Search this Thread

Jul 22, 2003 | 12:40 PM

mikwon

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 508

Likes: 0

From: NC

Taillight conversion, problem thingy majiggy!

K, did the S5 tails on my S4, but the brake light sockets dont fit, am I just *** backwards or am I correct and I need to, get either S5 sockets to fit or rip the prongs to make it fit...Help Please

Jul 22, 2003 | 12:45 PM

Aaron Cake

Engine, Not Motor

iTrader: (1)

Joined: Feb 2001

Posts: 29,798

Likes: 128

From: London, Ontario, Canada

http://www.aaroncake.net/rx-7/taillights.htm

Jul 22, 2003 | 12:56 PM

mikwon

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 508

Likes: 0

From: NC

Thanks for that, Im a lil' unclear, do I needswap out the bulb wiring harness for the conversion with the tails(S5)

Jul 22, 2003 | 01:04 PM

CoolAl

Full Member

Joined: Nov 2002

Posts: 91

Likes: 0

From: Alameda, CA

you have to swap the bulb wiring harness for the conversion to work.

Jul 22, 2003 | 03:03 PM

Aaron Cake

Engine, Not Motor

iTrader: (1)

Joined: Feb 2001

Posts: 29,798

Likes: 128

From: London, Ontario, Canada

You don't need to swap the harness. Both are almost exactly the same. Plug and play.

Jul 22, 2003 | 04:39 PM

mikwon

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 508

Likes: 0

From: NC

ok, so i have an 88 and its plug and play from a 91, Im tryin to plug, but I cant get any play....It wont fit, the other lights work(Brake and turn) its just the brake lights on both sides that are not working.