2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

tail Lights problem

Thread Tools
 
Search this Thread
 
Old Aug 2, 2004 | 01:55 PM
  #1  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 36
Likes: 0
From: San Juan Puerto Rico
Red face tail Lights problem

My rear tail lights are not working, the front panel and the front lights work well, The symptoms is that one day they didn't whant to turn on, later during the day they started for a little then they turn off.

I took it to a friend wich told me he clean the fuse I started the lights and seemed it was working fine, once I got home they where off again.

Seems like a cable or fuse or a plug somewhere but I figure it could be the turn on mechanism is going bad....

Any sugestions ...

By the way wich oe is the fuse for the tail lights any diagram will be helpfull to take it out and put a new one just in case...

later and help will be gladley apreciated
Axel
Reply
Old Aug 6, 2004 | 10:54 PM
  #2  
Full Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 157
Likes: 0
From: Somewhere
Check your grounds. And also check your switch.
Reply
Old Aug 6, 2004 | 11:13 PM
  #3  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
did you check the back of the light switch (as covered in the FAQ for FC at the top of this section)?
Reply
Old Aug 16, 2004 | 09:28 AM
  #4  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 36
Likes: 0
From: San Juan Puerto Rico
Need a diagram and Instructions

Well i need a diagram the back switch is burn...I need to put an external Switch but wich wires do I need any diahgram or instructios will be gladley apreciated...Thanks...

PS Other lights work well i just need to install a Switch for the tail lights Instructios Pls....

Later.

Axel
Reply
Old Aug 16, 2004 | 10:59 AM
  #5  
GeeHee13B's Avatar
Back at it...
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 166
Likes: 0
From: Buffalo, NY
the diagram is in the shop manuals in the FAQ. i went through the same process
Reply
Old Aug 16, 2004 | 11:27 AM
  #6  
hondahater's Avatar
spending too much money..
Tenured Member 10 Years
iTrader: (2)
 
Joined: Dec 2002
Posts: 10,116
Likes: 1
From: louisiana
I'll sell you a switch as I have two because same thing happend to mine but it seems like it is the wiring harnes. 15 bucks plus shipping. Let me know.
Reply




All times are GMT -5. The time now is 05:13 AM.