ok guys i know hundreds of ppl have posted this but besides the engine transmission ecu and wiring harness what will i need o ya and driveshaft. list the things i will need to make a n/a into a t2. also i have good suspension so minus that too. please im really lookig to doing this mod in the next 2 months need info. thanxs

 

if you dont have the LSD you will have to drill new holes in the turbo driveshaft to fit the n/a rear end, you will also neead a turbo 2 pressur sensor. turbo hood if you dont have a FMIC. also a downpipe if your motor didnt come with 1

good luck

 

Throttle line, fuel pump, and pb blaster

 

Afm & knock sensor...........

 

What brakes do you have? TII came with bigger ones. Just take:
Rear End
tranny, tranny mount
driveshaft
Master and slave cylinders. particularly the clutch.
Flywheel and clutch

 

what the hell is a PB blaster?

 

like wd-40

 

 

How does that stuff work? I've always used break Free.

 

PB Blaster is the greatest penetrating oil on the planet. Period. WD-40 is water in comparison.

To the original poster: read the FAQ.

 

pb blaster is good. If they dont sell that were you are from then try liquid wrench.

 

Don't forget the brake Check valve so boost doesn't go into your brake booster. That can == VERY bad.

Anyways.
Hmm
This is what I got.

TII jspec engine
TII tranny
TT Clutch slave cylinder
TII Clutch
TII AFM
TII Boost sensor
TII TID
Mazdatrix Hybrid driveshaft which mates to the NA rear end(me have lsd haha!).
Walbro Fuel pump
TII ECU
HKS FCD
Cleaned and tested injectors
Apex BOV(was gone off my jspec)
TII wiring harness

New motor mounts(Why leave old ones in???)
TII Hood
TII throttle cable(Make sure it matches the engine series)
New water pump(Why leave an old one on?Their like 50!)

Check sig for anything I forgot....