2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

t2 engine problem

Thread Tools
 
Search this Thread
 
Old 07-26-09, 08:51 PM
  #1  
T2 Darkness

Thread Starter
 
crazzykid277's Avatar
 
Join Date: Sep 2005
Location: Massachusetts
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
t2 engine problem

on soo i have a s4 t2 with a new engine streetported and no emmisions everything blocked off with 3 mm seals stock ecu , with safcII,

ok soo the problem is that wenn i start my car it takes forever if it starts, i have plenty of fuel plenty of spark, i have a feeling it might be a dirty injector or somthing
it starts but the engin soars to like 5k durring the cold start then goes down to 1100 and revs to 1500 like a (big cam) in a v8, after i shut it off it wont start back up again it will crank over and wont even atempt to fire,



any sugestions

i think its ether timing or injector failure
Old 07-27-09, 09:55 AM
  #2  
Rotary Freak
 
HAILERS2's Avatar
 
Join Date: Jul 2008
Location: FORT WORTH TEXAS
Posts: 1,660
Likes: 0
Received 1 Like on 1 Post
Make sure the water thermo sensor on the aft side of the water pump is connected up.
Old 07-27-09, 12:29 PM
  #3  
T2 Darkness

Thread Starter
 
crazzykid277's Avatar
 
Join Date: Sep 2005
Location: Massachusetts
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by HAILERS2
Make sure the water thermo sensor on the aft side of the water pump is connected up.
i have i went over the engine bay 3 times for plugs and stuff missing
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
gtcd
1st Generation Specific (1979-1985)
30
08-19-15 02:44 AM
Wicked93gs
New Member RX-7 Technical
0
08-17-15 12:14 PM



Quick Reply: t2 engine problem



All times are GMT -5. The time now is 07:58 PM.