T04B Turbocharger?
#1
Full Member
Thread Starter
T04B Turbocharger?
Anyone had any experiences with a T04B Turbocharger specifically a .60 A/R Compressor with a 1.15 AR Turbine. Im looking at the one at rotary works, but want some opinions first. It would be going on a rebuilt streetported engine, with 720cc injectors walbro 255 fuel pump, downpipe, stock exhaust manifold, 2 top mount intercoolers turned into front, greddy bov, tial wastegate. Shooting for around 280-400hp. These parts are still out there to be changed so feedback is much appreciated. I am looking to drift the car so I want to know if it is a good choice for drifting. This is a budget build and am not prepared to drop anything over 1k for a turbo.
#2
W. TX chirpin Monkey
Join Date: Sep 2001
Location: Mesquite, TX
Posts: 2,684
Likes: 0
Received 0 Likes
on
0 Posts
I had a 60-1 which is slightly bigger. I happen to like it. made 320 RWHP with a very conservative tune. I had a much larger FMIC, and running way more fuel. 550/1680
. I don't think you'll max out your fuel system, but the stock computer def won't like it. Street ported motor made full boost, 15 psi by about 3,800 RPM's.
. I don't think you'll max out your fuel system, but the stock computer def won't like it. Street ported motor made full boost, 15 psi by about 3,800 RPM's.
#3
version 2.0
iTrader: (17)
When you add the downpipe, waste gate, exhaust manifold, oil lines, and fabrication you are going to be looking at over 1000 bucks, maybe just at it, but probably over. Plus you are going to need a standalone ECM to control your extra fuel and boost, wiring, etc..... start saving.
Personally, Im going BNR.
Personally, Im going BNR.
Thread
Thread Starter
Forum
Replies
Last Post
BLUE TII
Single Turbo RX-7's
10
09-26-15 10:12 PM