2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

stock turbo ?'s

Thread Tools
 
Search this Thread
 
Old Mar 16, 2008 | 09:41 PM
  #1  
rspeed9i6's Avatar
Thread Starter
1308cc pure madness
Tenured Member 10 Years
 
Joined: Jan 2004
Posts: 213
Likes: 0
From: sacramento, CA
stock turbo ?'s

how much boost can the stock turbo safely put out on an s4 t2?...what is its boost capability from min to max boost?..im currently running 10lbs..well trying to..considering the boost creep...porting out the wastegate in progress...
Reply
Old Mar 16, 2008 | 09:50 PM
  #2  
skatingsamurai's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
 
Joined: Sep 2004
Posts: 1,132
Likes: 5
From: Co springs, co
the generally excepted answer is no more then 10psi it seems. porting the waste gate is always a good idea as well.. do you have a boost controller.

p.s. does it have the stock wastegate spring that you know of?
Reply
Old Mar 17, 2008 | 01:37 AM
  #3  
rspeed9i6's Avatar
Thread Starter
1308cc pure madness
Tenured Member 10 Years
 
Joined: Jan 2004
Posts: 213
Likes: 0
From: sacramento, CA
yes i have a manual boost controller....and it does have the stock wg spring...
Reply
Old Mar 17, 2008 | 01:56 AM
  #4  
arghx's Avatar
rotorhead
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Aug 2004
Posts: 16,205
Likes: 461
From: cold
it might hold 6 or 7 to redline but you can crank it up to 12-13 if you have supporting mods. it will be pretty torquey but full on its face soon after 5k
Reply
Old Mar 17, 2008 | 01:47 PM
  #5  
RotaryWeaponSE7EN's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 2,937
Likes: 3
From: Mission,KS
If you want upgrade to the s5 turbo, normally wont get the creep issue their. Also you can have them rebuilt with new housings for more boost if you like.
Reply
Old Mar 17, 2008 | 02:20 PM
  #6  
well uhhh's Avatar
I wanna go fast
Tenured Member 05 Years
 
Joined: May 2006
Posts: 378
Likes: 0
From: North Bend, WA
i beleive the stock turbo can run 12 psi safely, IF you have the supporting mods, ie enough fuel flow and proper voltage at the pump plus a way to control fuel. The stock intercooler is not meant for increased boost and i would not run more than 10psi through it, at that point the turbo is probably pushing more heat than boost, negating any gains from more boost. you will want to port the WG and while you are at it probably port intake runners. Its not hard with the proper tools.
Reply
Old Mar 17, 2008 | 09:34 PM
  #7  
rspeed9i6's Avatar
Thread Starter
1308cc pure madness
Tenured Member 10 Years
 
Joined: Jan 2004
Posts: 213
Likes: 0
From: sacramento, CA
ic ic...thx guys...as for the s5 turbo...are their any modifications i need to know of if i do install that one?...how much bigger is the s5 wastegate hole compared to the 16mm s4?..also..yes i have an afc neo dyno tuned, 720cc secondaries, and walbro fuel pump...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
May 30, 2019 08:47 PM
Turblown
Vendor Classifieds
0
Aug 18, 2015 10:01 PM




All times are GMT -5. The time now is 08:15 PM.