Hello

I've been offerd to buy some stock rx7 injectors very cheap and I want to install them in my Nissan 200sx, so I need some info about the rx7 injectors.
they come from the turbo modell, year 1988.
Are they high or low ohm?
How much do they flow and at what fuelpressure?

The stock one's on my nissan flows 370cc at 2,5bar fuel pressure.
My english might not be the best, but i'm from sweden

 

They are high impedence and are 550cc. Not sure about fuel pressure though.

 

http://www.rotaryresurrection.com/injector.html

 

Thanks alot!
But what do they mean with "plug notch position"=square center or square offset?

 

The 550cc/min is at 250kPa (2.5bar).

 

Square center means that the electrical connector is square, and has notch in the center. The connector has to have a cut-out for this notch or the connector won't fit.

Square offset means the square plug has a notch offset to one side.