2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

stock alarm (again) and rotary puke on my fan shroud.

Thread Tools
 
Search this Thread
 
Old Sep 11, 2010 | 01:21 PM
  #1  
NoPistons!'s Avatar
Thread Starter
Tango Down
Tenured Member 05 Years
iTrader: (3)
 
Joined: Sep 2008
Posts: 2,895
Likes: 3
From: SC/NC
stock alarm (again) and rotary puke on my fan shroud.

Soooo, if it's not too much trouble, go outside and snap a cell phone picture of this "module" i'm supposed to unplug. Please. I've hunted for this gold box with three screws under the glove box and only see a speaker and the bs for the heater/blower.....and the ecu cover.

Please. Need visual on this **** so i dont have to unplug my battery every damn time i want to open my car door.



Rotary puke was on my fan shroud. It looks to be comming from the rad cap....well, it IS comming from the rad cap. When i burped the system a while back, i didn't see anything indicative of blown coolant seals. I'm also n/a, for the record and my temps never get close to half way on the gauge when i drive. 3k shifts, 2k cruising and a 2 mile commute to work every day this week is the worst i've done to her.


The overflow is still at the level it was at when i topped the coolant off.

Suggestions?
Reply
Old Sep 11, 2010 | 01:46 PM
  #2  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Not a true visual.

Reply
Old Sep 11, 2010 | 04:25 PM
  #3  
NoPistons!'s Avatar
Thread Starter
Tango Down
Tenured Member 05 Years
iTrader: (3)
 
Joined: Sep 2008
Posts: 2,895
Likes: 3
From: SC/NC


I pulled my glove box out. It's that big silver box on the left, correct?


Should i get a higher pressure rad cap?
Reply
Old Sep 11, 2010 | 04:33 PM
  #4  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
That should be it.
Reply
Old Sep 11, 2010 | 04:40 PM
  #5  
NoPistons!'s Avatar
Thread Starter
Tango Down
Tenured Member 05 Years
iTrader: (3)
 
Joined: Sep 2008
Posts: 2,895
Likes: 3
From: SC/NC
Alrighty. I'll try it.
Reply
Old Sep 11, 2010 | 05:04 PM
  #6  
NoPistons!'s Avatar
Thread Starter
Tango Down
Tenured Member 05 Years
iTrader: (3)
 
Joined: Sep 2008
Posts: 2,895
Likes: 3
From: SC/NC
And, done. Thank you.

No chime, no annoying alarm. I need to have a garage sale. I have so many parts laying around i'm never going to use....
Reply
Old Sep 11, 2010 | 06:24 PM
  #7  
FelixIsGod29X's Avatar
Manual Rack
Tenured Member: 20 Years
iTrader: (50)
 
Joined: Aug 2005
Posts: 3,652
Likes: 1
From: Wanaque NJ
so PM me a list of parts you got : )
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
cristoDathird
Introduce yourself
28
May 30, 2019 08:47 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM
7aull
1st Gen General Discussion
4
Aug 14, 2015 10:44 PM




All times are GMT -5. The time now is 08:30 AM.