2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Stock alarm?

Thread Tools
 
Search this Thread
 
Old Jul 21, 2003 | 08:14 PM
  #1  
ImprezedRS's Avatar
Thread Starter
Damnit, steel doors hurt!
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 788
Likes: 0
From: Charlotte, NC
Stock alarm?

Hey i was wondering how do I disarm the stock alarm system? Evertime I open my doors the alarm goes off and I can only disarm it by unlocking the hatch?

I want to permantly turn off the alarm, how do I do this?
Reply
Old Jul 21, 2003 | 08:39 PM
  #2  
Black13B's Avatar
In Full Autist Cosplay
Tenured Member 15 Years
iTrader: (1)
 
Joined: Nov 2002
Posts: 2,330
Likes: 0
From: Alberta
Re: Stock alarm?

Originally posted by ImprezedRS
I want to permantly turn off the alarm, how do I do this?
Remove it.

It's a big shiney goldish colour box with a harness plugged into it.

Take apart the passenger side paneling around the stock speaker (underside of the p/s dash), and have a look around for it.

You'll see it.. It takes 2 seconds to unplug, and about 4 seconds to totally remove..
Reply
Old Jul 21, 2003 | 09:05 PM
  #3  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
turn the key in the door to unlock, for disarm
Reply
Old Jul 22, 2003 | 02:55 AM
  #4  
ImprezedRS's Avatar
Thread Starter
Damnit, steel doors hurt!
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 788
Likes: 0
From: Charlotte, NC
the door locks won't disarm it and ever time I unlock it and open the door it goes off. Thats why i got to do it from the hatch
Reply
Old Jul 22, 2003 | 03:17 AM
  #5  
introVert's Avatar
putting it down daily
Tenured Member 15 Years
 
Joined: May 2003
Posts: 1,294
Likes: 0
From: Auburn, CA
Try replacing your driver door handle with another equipped with the harness for the lighted/alarmed keyhole- did the trick on my vert, and the lighted key looks sweet!
Reply
Old Jul 22, 2003 | 07:30 PM
  #6  
ImprezedRS's Avatar
Thread Starter
Damnit, steel doors hurt!
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 788
Likes: 0
From: Charlotte, NC
Well i fixed it, took the door panels off and noticed that the harness in the door and the one in the car were both unplug, All works now.
Reply
Old Jul 22, 2003 | 08:50 PM
  #7  
Davidov's Avatar
Senior Member
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Jun 2003
Posts: 602
Likes: 0
From: FWTX
My "Security" system only blinks when I open the doors, or the doors are locked for a period of time.

Thanks Black13B for the tip.
Reply
Old Jul 22, 2003 | 11:27 PM
  #8  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally posted by ImprezedRS
the door locks won't disarm it and ever time I unlock it and open the door it goes off. Thats why i got to do it from the hatch
If the key in the door turned to unlock does not disarm it, then the key switch might be bad and in need of replacing.

might be your whole problem right there.

And remember the latch switch on the inside of the doors will not disarm, they will only arm and trigger the system.

And also remember that Black13B's post on the alarm location only works on the S4 (86-88), as the S5 has it built into the CPU.

Last edited by Icemark; Jul 22, 2003 at 11:43 PM.
Reply
Old Jul 22, 2003 | 11:51 PM
  #9  
dr0x's Avatar
pei > caek
Tenured Member 05 Years
 
Joined: May 2002
Posts: 4,643
Likes: 0
From: Mars
Try to figure mine out icemark.

Anytime I close the doors on my car the light automatically starts blinking. If I lock the doors and then go away for 5 min and then pop them open w/o using the key it doesnt go off. The light flashes whether or not the doors are even locked.
Reply
Old Jul 23, 2003 | 12:06 AM
  #10  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
On the S4 alarm, the light should be on solid for about 30 seconds after the last door was closed while locked. Then it will start blinking fast for another 15 seconds, and then start blinking slow (like once every 2 or 3 seconds) when armed.

If yours is always blinking fast, then it is not arming (probably a bad latch switch).
Reply
Old Jul 23, 2003 | 12:35 AM
  #11  
ImprezedRS's Avatar
Thread Starter
Damnit, steel doors hurt!
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 788
Likes: 0
From: Charlotte, NC
Well i figured the problem to mine posted it abbove
Reply
Old Jul 23, 2003 | 01:04 AM
  #12  
Kai's Avatar
Kai
Rotorphile.
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 1,296
Likes: 0
From: Richmond/NoVA
What does it take to set off the factory alarm? Mine only works on rare occasion, and it's only gone off twice. It arms itself about once in every 20 tries.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
May 30, 2019 08:47 PM
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM
pzr2
General Rotary Tech Support
1
Aug 15, 2015 08:29 PM




All times are GMT -5. The time now is 05:28 PM.