Steering Wheel questions
02-25-02, 06:32 PM
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: Dallas, Texas USA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Steering Wheel questions
Can anyone tell me what the size of a stock '91 N/A steering wheel is? 320mm, 350mm, 360mm? What sort of challenges are associated with changing the original for, say, a Momo wheel? Thanks
02-25-02, 06:56 PM
#2
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Not sure on the size, but you basically pull the old one off and (with the correct boss kit) bolt the new one on. If the old one comes off easily it's a 5 min job. I just yanked repeatedly (and swore some!) until it popped off. My Momo is only slightly smaller OD than the stock wheel but because it's a nice thick rim, the ID is quite a bit smaller. As a result I can't see the top of the tacho, the important 80-120km/h part of the speedo and the indicators! Most annoyingly, my carefully positioned 50mm VDO boost gauge (in front of the stock boost guage) is now half obscured! Luckily it's only the vacuum half.
