2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Starting problems

Thread Tools
 
Search this Thread
 
Old Jan 13, 2007 | 11:56 AM
  #1  
RX7freak08's Avatar
Thread Starter
Wish he had a running rx7
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 1,180
Likes: 0
From: Oklahoma City
Starting problems

I know alot of people are going to say look it up? Well I already did i have talked to alot of people. I am having problems with my 87 RX7 13B the engine gets flooded alot of the time and i know how to drain it. I can get it started alot of times but i have to put it on a battery charger for an hour and it start i know i have a idle problem, I have to adjust the tps, and i'm going to get rid of my cats because I'm having a clog problem. What mainly i'm asking about is why is my car not starting right. It has a brand new starter, alternator, and battery. What i'm thinking is that I don't have enough battery power to start it. I also switched out my ignition coils and my spark plugs and wires I haven't started it yet because i'm adding stuff to get it running. So if you have any idea on how to fix my starting problem thanks. What it is doing really is that i charge the battery for about 1 hour then I make sure that it isn't flooded i get in turn the fuel on then i turn the key and the rpms get high and then i turn off the fuel so it doesn't over flow and then it gets higher and that is what i have to go if you have any advice please tell me.
Reply
Old Jan 13, 2007 | 12:15 PM
  #2  
notaless's Avatar
Menlo Mazda Parts Guy ^_^
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 69
Likes: 0
From: San Fransico - DalY City
You most likey have leaky injectors. Simple fix is make a kill switch for the fuel pump. That way your injectors wont be dripping into the housing thus fixing your constant flooding.
Reply
Old Jan 13, 2007 | 01:21 PM
  #3  
RX7freak08's Avatar
Thread Starter
Wish he had a running rx7
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 1,180
Likes: 0
From: Oklahoma City
Ok thanks that is what i thought but i wasnt to sure about it. So I would have take off the upper intake to get to them.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM




All times are GMT -5. The time now is 08:28 AM.