Spin Turn Knob
#4
Senior Member
Join Date: Mar 2004
Location: Ontario, Canada
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
1. Pry the chrome ring (behind the grip) on the ebrake back.
2. Remove the grip section of the handbrake by twisting while pulling it directly forward.
3. Unscrew the thumb button (it does unscrew, just turn hard).
4. Remove the spring behind the thumb button by twisting it counter clockwise approx. 180 degrees and pulling it off.
5. Replace the grip and lock it in place again with the chrome retaining ring.
6. Thread your 'spin turn ****' onto the threads where the thumb button was perviously threaded.
Done.
2. Remove the grip section of the handbrake by twisting while pulling it directly forward.
3. Unscrew the thumb button (it does unscrew, just turn hard).
4. Remove the spring behind the thumb button by twisting it counter clockwise approx. 180 degrees and pulling it off.
5. Replace the grip and lock it in place again with the chrome retaining ring.
6. Thread your 'spin turn ****' onto the threads where the thumb button was perviously threaded.
Done.
Thread
Thread Starter
Forum
Replies
Last Post
REX7&Z32TT
New Member RX-7 Technical
2
09-14-15 08:46 AM