Speed machine performance in newest Super Street
02-19-05, 06:11 PM
#1
Rotary Enthusiast
Thread Starter
Join Date: May 2002
Location: Boston
Posts: 1,203
Likes: 0
Received 0 Likes
on
0 Posts
Speed machine performance in newest Super Street
You guys have to check this months issue of super street. It has SMP's monstrous FC. Its an 86 TII with a nice silver paint job, wide body kit, roll cage basically most if not all the goodies there offering at that websight. Theres a whole bunch of new **** those guys have for our cars.
This FC has a cosmo engine with some huge street port, balanced/blueprinted rotors, cryo treated e-shaft (no clue what that is supposed to do), very large turbo, 1300cc primary, 1600cc secondary and so on.
Its pushing 750 claimed hp with a 250 shot wet nos system, so basically hes looking at going back in time. I had to ask myself if he's doing it all just for the numbers because i mean 750hp with a nice 250 shot of nitrous is a little overkill, but hey its good for the FC.
These guys obviously went all out but i question how or why they decided to use a stock TII transmission. I mean i heard those were good for around what 400hp max??? So i seriously doubt this is going to be any track car but more of a show car for those guys.
The beast
http://www.clubfc3s.com/3big.jpg
Speed machine performance websight:
http://www.speedmachineperformance.com/home
This FC has a cosmo engine with some huge street port, balanced/blueprinted rotors, cryo treated e-shaft (no clue what that is supposed to do), very large turbo, 1300cc primary, 1600cc secondary and so on.
Its pushing 750 claimed hp with a 250 shot wet nos system, so basically hes looking at going back in time. I had to ask myself if he's doing it all just for the numbers because i mean 750hp with a nice 250 shot of nitrous is a little overkill, but hey its good for the FC.
These guys obviously went all out but i question how or why they decided to use a stock TII transmission. I mean i heard those were good for around what 400hp max??? So i seriously doubt this is going to be any track car but more of a show car for those guys.
The beast
http://www.clubfc3s.com/3big.jpg
Speed machine performance websight:
http://www.speedmachineperformance.com/home
Last edited by RylAssassin; 02-19-05 at 06:16 PM.
02-19-05, 09:07 PM
#2
750 with a full nitrous system isn't so far fetched, espcially with the modificaions on that car. There alot of cars that I've seen on this forum running 500rhhp on a simular setup. And plus lets see if the stock tranmission on the system holds up. These guys are good, so I expect this car to be great.
PS: Im sure it'll make an appearance at the track
.
PS: Im sure it'll make an appearance at the track
.
02-20-05, 12:23 AM
#5
Mechanical Engineering
Originally Posted by White87FC
was just thinkin the same.... that would be crazy
but imagine all the smoke and the sound
makes me happy
02-20-05, 12:31 AM
#6
Full Member
Join Date: Sep 2003
Location: SATX
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Actually its 750 hp with the 250 shot in reserve..ei 1000hp total.
Quoted from Super Street:
"250 shot wet Nitrous Express four-port system ultimately helps give a little extra kick to the already monstrous 750hp"
Nitrous is just for some extra freeway fun . Got to love South 15, but thats San Diego for you.
Quoted from Super Street:
"250 shot wet Nitrous Express four-port system ultimately helps give a little extra kick to the already monstrous 750hp"
Nitrous is just for some extra freeway fun . Got to love South 15, but thats San Diego for you.
Trending Topics
02-20-05, 02:15 AM
#9
What you lookin' at?
Join Date: Aug 2002
Location: Kansas City
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RylAssassin
You guys have to check this months issue of super street. It has SMP's monstrous FC. Its an 86 TII with a nice silver paint job, wide body kit, roll cage basically most if not all the goodies there offering at that websight. Theres a whole bunch of new **** those guys have for our cars.
This FC has a cosmo engine with some huge street port, balanced/blueprinted rotors, cryo treated e-shaft (no clue what that is supposed to do), very large turbo, 1300cc primary, 1600cc secondary and so on.
Its pushing 750 claimed hp with a 250 shot wet nos system, so basically hes looking at going back in time. I had to ask myself if he's doing it all just for the numbers because i mean 750hp with a nice 250 shot of nitrous is a little overkill, but hey its good for the FC.
These guys obviously went all out but i question how or why they decided to use a stock TII transmission. I mean i heard those were good for around what 400hp max??? So i seriously doubt this is going to be any track car but more of a show car for those guys.
The beast
http://www.clubfc3s.com/3big.jpg
Speed machine performance websight:
http://www.speedmachineperformance.com/home
This FC has a cosmo engine with some huge street port, balanced/blueprinted rotors, cryo treated e-shaft (no clue what that is supposed to do), very large turbo, 1300cc primary, 1600cc secondary and so on.
Its pushing 750 claimed hp with a 250 shot wet nos system, so basically hes looking at going back in time. I had to ask myself if he's doing it all just for the numbers because i mean 750hp with a nice 250 shot of nitrous is a little overkill, but hey its good for the FC.
These guys obviously went all out but i question how or why they decided to use a stock TII transmission. I mean i heard those were good for around what 400hp max??? So i seriously doubt this is going to be any track car but more of a show car for those guys.
The beast
http://www.clubfc3s.com/3big.jpg
Speed machine performance websight:
http://www.speedmachineperformance.com/home
02-20-05, 04:55 PM
#10
Rotary Enthusiast
Thread Starter
Join Date: May 2002
Location: Boston
Posts: 1,203
Likes: 0
Received 0 Likes
on
0 Posts
I was checking out their websight and they actually dont have that body kit on the car. It looks like an RE kit but im not sure.
Either way those guys are doing a great job keeping the FC in the spotlight i mean just look at how they introduced it, in huge letters all you see is BACK IN THE DAY.
Either way those guys are doing a great job keeping the FC in the spotlight i mean just look at how they introduced it, in huge letters all you see is BACK IN THE DAY.
05-03-05, 02:21 PM
#18
i am legendary
Join Date: Sep 2003
Location: Kirkland, WA
Posts: 8,478
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ni5mo180SX
Am I the only one who finds their FC ridiculously ugly...........?
05-03-05, 03:28 PM
#19
Senior Member
Join Date: Apr 2003
Location: San Francisco, CA
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Speed machine is riced-out FC deal. They try to hard to look like JDM. They've been in business for 1 year maybe 2 and they act like they are the **** in US Rotary world. We have many shops he with 20-25 year experience with rotaries.
I won't get excited by someone whos cars compete only in "SHOW" category.
I won't get excited by someone whos cars compete only in "SHOW" category.
05-03-05, 04:01 PM
#20
Originally Posted by petex
Speed machine is riced-out FC deal. They try to hard to look like JDM. They've been in business for 1 year maybe 2 and they act like they are the **** in US Rotary world. We have many shops he with 20-25 year experience with rotaries.
I won't get excited by someone whos cars compete only in "SHOW" category.
I won't get excited by someone whos cars compete only in "SHOW" category.
.
05-03-05, 04:14 PM
#21
Rotary Freak
iTrader: (3)
Join Date: Feb 2002
Location: MN
Posts: 1,697
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by petex
Speed machine is riced-out FC deal. They try to hard to look like JDM. They've been in business for 1 year maybe 2 and they act like they are the **** in US Rotary world. We have many shops he with 20-25 year experience with rotaries.
I won't get excited by someone whos cars compete only in "SHOW" category.
I won't get excited by someone whos cars compete only in "SHOW" category.
Thats why Falken just had Dave and FC3s.org build their drift FD!
ya, right.
-a
05-03-05, 04:57 PM
#23
Rotary Freak
iTrader: (3)
Join Date: Feb 2002
Location: MN
Posts: 1,697
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TOOSHORT_88
I would have to say that that fc lacks styling , its like they had a certain budget and went all out for engine upgrades ,seldom exterior upgrades, they used stock s/4 mirrors come on !
-a
05-03-05, 05:02 PM
#24
zoom zoom go boom
I've had this car on my wallpaper for a lil while now. Cause that car is what I hope mine could someday be. Its NOT overly done on the exterior or the interior. But its ***** to the walls under the hood. I love that car. I think they did a damn good job with it.
05-03-05, 08:06 PM
#25
Man o' Man what an FC that is...750 rwhp with out the nitrous?!? I wish I could... I don't know... I'm just kinda speechless... What do U do with all that? I'd be happy with half those horses.. or half the CF.. or half the paint.. LOL Oh but to ask what she could be if only!?! someone has to build them like that or else we would never see what truly could be. I found an earlier pic of this on another site (design images?) Absolutely mad about it.
Ramses666
Ramses666